Contact Us

Dongguan Changrongjia Mould Technology Co.,Ltd
Contact Person:
Pan Zhixun
Phone No.:
+86 769-87380656/87380676
Mobile:
+86 18925802351
+86 18925802361
Fax:
+86 769-87380628
E-mail:
pat@crmold.com
Website:
www.crmold.com
Address:
No.46 Qingtang Road, Xiani Village, Qingxi Town, Dongguan 523655, Guangdong, China

Home > News > Content
Common Malfunctions And Their Elimination Methods Of Drilling Machine Oct 21, 2016

Red head does not come on:

1, adjust the pressure to the 4-5KG\GM

2, punch machine punches up to an appropriate position, punch machine punches hit shallow point.

Second, burrs or not:

1, use steel down grind lower for about five or six minutes, then oil stone for two or three minutes,

Three, punch will pull plastic bags:

1, check that the air pressure is too low

2, check the drilling signaling systems are normal

3, check the drill and cutter are synchronized

Four down, punching machine stay too long intermittent rush not to bore or good and bad:

1, check that the air pressure is too low

2, gas shortages

3, check whether the solenoid valve inlet or muffler plug

4, check that the cylinder is leaking